BNVZL - 69837, AMBERLITE IRN-78 RESIN
- MSDS: BNVZL
- Manufacturer: ROHM AND HAAS CO
- Product Name: 69837, AMBERLITE IRN-78 RESIN
- National Stock Number: 6810-00-776-7788
Product Identification
Product ID:69837, AMBERLITE IRN-78 RESIN
MSDS Date:11/07/1988
FSC:6810
NIIN:00-776-7788
MSDS Number: BNVZL
Responsible Party
PHILADELPHIA, PA 19105
US
Emergency Phone: 215-502-2000/CHEMTREC 800-424-9300
Info Phone: 215-502-2000/CHEMTREC 800-424-9300
Cage: 77902
Contractor
Telephone: 215-592-2521/215-592-3000
Cage: 77902
Ingredients
STYRENE/DIVINYLBENZENE ANION EXCHANGE RESIN
Fraction By Weight: 35-50%
50-65 (WT)
CAS: 7732-18-5
RTECS: ZC0110000
Fraction By Weight: 50-65%
STRONG OXIDIZING AGENTS IN CONT W/ION EXCHANGE
RTECS: 9999999ZZ
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:PRODUCT, AS SUPPLIED, CAN CAUSE EYE
IRRITATION. GROUND ION EXCHANGE RESINS SHOULD BE TREATED AS
POTENTIAL EYE IRRITANTS. A FINELY GROUND FORM OF A STRUCTURALLY
RELATED STRONG ACID CATION EXCHANGE RESI N PRPODUCED SEVERE RABBIT
EYE IRRITATION.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:EYES:FLUSH W/LARGE AMOUNTS OF WATER & CONTINUE FOR AT LEAST
15 MINS. GET MD PROMPTLY. SKIN:FLUSH W/COPIOUS AMOUNTS OF WATER.
CALL MD . INHAL:REMOVE TO FRESH AIR. SUPPORT BREATHING (GIVE
O*2/ARTF RESP) . INGEST:CALL MD IMMEDIATELY .
Fire Fighting
Extinguishing Media:CO*2, DRY CHEMICAL OR WATER SPRAY.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:TOXIC PRODUCTS MAY INCLUDE NO*X &
ALKYLAMINES.
Accidental Release
Spill Release Procedures:FLOOR MAY BE SLIPPERY. USE CARE TO AVOID
FALLS. SWEEP UP & TRANSFER TO CONTAINER FOR RECOVERY OR DISPOSAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:STORE INDOOR OR OUTDOORS. STORAGE
TEMP: 32F MIN - 120F MAX. STORE AT AMBIENT TEMPS. AVOID REPEATED
FREEZE-THAW CYCLES.
Other Precautions:MAX OPERATING TEMP RECOM IS 140F/60C. FUNCTIONAL
GROUP DESTRUCTION & LOSS OF CAPACITY WILL OCCUR ABOVE THIS TEMP.
CAUTION:DO NOT PACK COLUMN W/DRY ION EXCHANGE RESIN. DRY BEADS
EXPAND WHEN WETTED; EXP ANSION CAN CAUSE GLASS (SUPP DATA)
Exposure Controls
Respiratory Protection:NONE REQUIRED FOR NORMAL OPERATIONS. NIOSH/MSHA
APPROVED RESPIRATOR APPROPRIATE FOR EXPOSURE OF CONCERN .
Ventilation:NORMAL ROOM VENTILATION.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:EYE WASH FACILITY.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
PH:9.5-11 (AQUEOUS SLURRY). OTHER PREC:COLUMN TO SHATTER.
CAUTION:NITRIC ACID & OTHER STRONG OXIDIZING AGENTS CAN CAUSE
EXPLOS-TYPE RXNS WHEN MIXED W/ION EXCHANGE RESINS. PROPER DESIGN OF
EQUIP TO PVN T RAPID BUILD-UP OF PRESS IS NEC IF USEOF AN OXIDIZING
AGENT SUCH AS NITRIC ACID IS CONTEMPLATED. BEFORE USING (ING 3)
Chemical Properties
HCC:N1
Boiling Pt:B.P. Text:ING 2
Melt/Freeze Pt:M.P/F.P Text:ING 2
Vapor Pres:17 @ 20C
Vapor Density:<1
Spec Gravity:1-1.4 (H*2O=1)
pH:SUPDAT
Evaporation Rate & Reference:<1 (BUTYL ACETATE=1)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:BEADS.
Percent Volatiles by Volume:ING 2
Stability
Stability Indicator/Materials to Avoid:YES
AVOID CONTACT W/CONCENTRATED NITRIC ACID OR ANY OTHER STRONG OXIDIZING
AGENT AT ALL TIMES.
Stability Condition to Avoid:TEMPERATURES OVER 392F/200C.
Hazardous Decomposition Products:THERMAL DECOMPOSITION MAY YIELD
STYRENE & DIVINYLBENZENE MONOMERS, ALKYLAMINES & NO*X.
Disposal
Waste Disposal Methods:UNUSED RESIN MAY BE INCINERATED OR LANDFILLED IN
FACILITIES MEETING LOCAL, STATE & FEDERAL REGULATIONS. FOR
CONTAMINATED RESIN, THE USER MUST DETERMINE THE HAZARD & USE AN
APPROPRIATE DISPOSAL METHOD.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.